What the fuel regulation guarantees an engine designer: a specification divergence register for United States compression-ignition certification
DOI:
https://doi.org/10.31224/8256Keywords:
diesel fuel specification, engine certification, 40 CFR 1065, 40 CFR 1090, fuel injection, renewable diesel, regulatory gap analysis, open government dataAbstract
A compression-ignition engine sold in the United States is certified once, on a test fuel whose properties are fixed by 40 CFR 1065.703. It is then operated, for a useful life measured in thousands of hours, on fuel that need only satisfy 40 CFR 1090 — a materially shorter list of requirements. The two regulations are written for different purposes, and neither references the other’s property set.
This paper reads both, property by property, and records where they fail to overlap. Of 10 fuel properties selected because a mechanism connects each to the injection event or its immediate consequences, 3 are constrained at certification and in the market, 3 are constrained at certification only, and 4 are constrained by neither. The federal government publishes measurements of in-service values for none of the ten, so the size of the realised divergence is not a quantity anyone outside the fuel supply chain can currently estimate from public data.
The four unconstrained properties are not peripheral to injection. They are bulk modulus, cloud point, FAME content, and lubricity (HFRR). Bulk modulus sets the speed of sound in the fuel and therefore the propagation of the pressure wave from pump to nozzle, and therefore the actual start of injection relative to the commanded one. Lubricity sets the wear margin at the hardware performing the injection. Neither has a numeric limit in either regulation.
Comparing the certification envelope against three commercial consensus standards across 24 property-standard pairs, we find that renewable diesel meeting EN 15940 lies wholly outside the certification fuel’s density envelope — 838.9–864.6 kg/m³ against 765–800 kg/m³, an overlap of exactly zero. Its cetane floor sits above the certification fuel’s cetane ceiling. Across 8,354 certified compression-ignition engine families, none was certified on a fuel whose declaration mentions renewable, biodiesel, or paraffinic content, and 7,928 of them (94.9%) meter fuel volumetrically, the configuration in which a density shift becomes a fuelling error before it becomes anything else.
The structural result concerns the certification record’s data model rather than any individual engine: the record has no field in which density, cetane number, viscosity, bulk modulus, lubricity, or FAME content could be recorded for the fuel actually burned in service. The one fuel property it reliably encodes is sulfur — the property that is federally regulated, federally enforced, and federally measured. The record mirrors the regulation’s scope, and both stop short of the properties that perturb the injection event.
Downloads
Downloads
Posted
License
Copyright (c) 2026 Osariemen Imafidon

This work is licensed under a Creative Commons Attribution 4.0 International License.