Preprint / Version 1

Design and Implementation of a Portable Electropneumatic Bottle Filling and Capping Machine with Relay-Based Control

##article.authors##

DOI:

https://doi.org/10.31224/8842

Keywords:

bottle filling and capping, electropneumatics, mechatronics education, relay ladder logic, rotary indexing table, ladder logic, Electrical and Instrumentation Engineering

Abstract

This paper presents the design, fabrication and testing of a compact, castor-mounted electropneumatic machine that feeds,
fills and caps bottles automatically. Developed as a mechatronics capstone project for small-scale production and laboratory teaching, the machine carries bottles on a rotary indexing table, advanced by a ratchet-and-pawl mechanism, through pushing, filling and capping stations. Four double-acting pneumatic cylinders, each driven by a single-solenoid 5/2-way valve, perform the motions. The complete sequence is implemented in hard-wired 24 V DC relay logic built from 14 control relays, an on-delay timer that sets the fill period and a preset counter that groups bottles into sets of three, with end-position and bottle-presence sensors interlocking every station. The mechanism was modeled in SolidWorks and validated with a full-scale CNC-cut MDF mock-up before the final machine was built. The paper documents the pneumatic circuit and every relay rung, summarizes the set, seal-in and release conditions of each relay, and derives a simple timing model that links fill volume and throughput to the timer preset and the cylinder stroke times. The prototype performs a continuous fill-and-cap cycle without operator intervention, showing that low-cost relay logic can reproduce the sequencing and interlocking of a PLC-controlled packaging line while keeping every signal visible for teaching and fault-finding.
 

Downloads

Download data is not yet available.

Author Biographies

Furqan Yousaf, University of Engineering and Technology, Lahore, Pakistan.

Department of Mechatronics and Control Engineering, University of Engineering and Technology, Lahore. Country: Pakistan.

Saad

Department of Mechatronics and Control Engineering, University of Engineering and Technology, Lahore. Country: Pakistan.

Abdul Raheem

Department of Mechatronics and Control Engineering, University of Engineering and Technology, Lahore. Country: Pakistan.

Downloads

Posted

2026-11-19