Preprint / Version 1

Loading-Mode Dependence of Topology and Functional Grading in TPMS Lattices

##article.authors##

  • Ali Entezari University of Technology Sydney
  • Chi Wu
  • Boyang Wan
  • Yuhao Zhang
  • Anson Wen Han Cheong
  • Qing Li

DOI:

https://doi.org/10.31224/8861

Abstract

Additively manufactured triply periodic minimal surface (TPMS) lattices, particularly in their functionally graded (FG) form, offer strong potential for load-bearing biomedical applications due to their tunable mechanical properties and biomimetic architecture. However, their performance is predominantly evaluated under uniaxial compression, leaving their behaviour under more complex loading conditions involving shear and torsion poorly understood. In this work, we present a systematic investigation of the mechanical response of gyroid and primitive FG-TPMS lattices under compression, compression–shear, and torsional loading. Lattices with similar nominal global architectural porosities (approximately 47% for primitive and 45% for gyroid) were fabricated from Digital ABS Plus™ using PolyJet printing and characterised experimentally. The results revealed a strong loading-mode dependence of functional grading and topology. Under compression, grading enhanced stiffness in gyroid lattices but had limited influence on primitive lattices, which consistently exhibited higher compressive stiffness and yield load. Under compression–shear, stiffness and yield showed minimal sensitivity to grading. In contrast, torsional loading exhibited a pronounced dependence on grading, with substantial increases in stiffness and yield torque achieved by redistributing material towards the outer regions. While primitive lattices outperformed gyroid under compression, this advantage did not generalise to shear- or torsion-dominated conditions. These findings demonstrate the loading-mode dependence of radial grading and provide experimental evidence to guide the design of FG-TPMS lattices for specific loading conditions.

Downloads

Download data is not yet available.

Downloads

Posted

2026-11-20