Archives - Page 193

• STATIC THERMAL ANALYSIS OF FINS MODELS USING ANSYS

  Rajat Kumar, Devendra Singh, Ajay Kumar Sharma

  DOI: https://doi.org/10.31224/osf.io/8fzy7

  • Analysis and Heat transfer enhancement.
  • and FEM
  • extended surfaces
  • Heat transfer
  • Thermal analysis

  Downloads: 2573 - Submitted 2020-05-26 - Posted 2020-05-26

  • PDF

• DESIGN AND FABRICATION OF PAPER RECYCLING UNIT

  Aditya Vinod Pillai, Monu George Varghese, Davis Jose

  DOI: https://doi.org/10.31224/osf.io/t2cb9

  • craft papers
  • environment
  • fabrication
  • paper
  • recycling
  • waste paper

  Downloads: 2076 - Submitted 2020-05-26 - Posted 2020-05-26

  • PDF

• THEORETICAL INVESTIGATION OF MULTIDIMENSIONAL FORCE/MOMENT MEASUREMENT DYNAMOMETER

  Danaish, Ren Zongjin, Jhang Jun, Muhammad Ayaz Akbar

  DOI: https://doi.org/10.31224/osf.io/sau3r

  • and FEM simulation.
  • multi-dimensional measurement
  • SolidWorks design
  • Three-axis piezoelectric sensor

  Downloads: 573 - Submitted 2020-05-26 - Posted 2020-05-26

  • PDF

• THE EFFECT OF DARRIEUS AND SAVONIUS WIND TURBINES POSITION ON THE PERFORMANCE OF THE HYBRID WIND TURBINE AT LOW WIND SPEED

  Nawfal M. Ali, Abdul Hassan A. K, Sattar Aljabair

  DOI: https://doi.org/10.31224/osf.io/grbmv

  • Hybrid wind turbine
  • Low wind speed
  • Vertical axis wind turbine

  Downloads: 1363 - Submitted 2020-05-26 - Posted 2020-05-26

  • PDF

• IONIC LIQUID CATALYSIS TO PRODUCE COTTONSEED OIL BY TRANSESTERIFICATION AND PERFORMANCE TEST IN DIESEL ENGINE

  M. Udaya Kumar, N. Sivaramakrishnan

  DOI: https://doi.org/10.31224/osf.io/y7u4f

  • Hybrid wind turbine
  • Low wind speed
  • Vertical axis wind turbine

  Downloads: 562 - Submitted 2020-05-26 - Posted 2020-05-26

  • PDF

• DESIGN ANALYSIS AND INVESTIGATION OF FABRICATED WEEDER FOR TAPIOCA FARM

  Sivakumar Annamalai, Manivel P, Justin Prakasam R, Kishore G M, Karunakaran S

  DOI: https://doi.org/10.31224/osf.io/ewgjt

  • labour cost.
  • traditional tools
  • water percolation
  • Weeding

  Downloads: 1367 - Submitted 2020-05-26 - Posted 2020-05-26

  • PDF

• DESIGN AND DEVELOPMENT OF HAND POWER TRICYCLE FOR DISABLED USING HAND LEVER AND CRANK SYSTEM

  G Sarat, A Somaiah

  DOI: https://doi.org/10.31224/osf.io/7tu2q

  • Mechanism
  • Novel link.
  • Steering PRN
  • Trike wheel

  Downloads: 1640 - Submitted 2020-05-26 - Posted 2020-05-26

  • PDF

• RADIATION AND CHEMICAL REACTION EFFECTS ON MHD CASSON FLUID FLOW OF A POROUS MEDIUM WITH SUCTION/INJECTION

  Nagaraju Vellanki, K. Hemalatha, G. Venkata Ramana Reddy

  DOI: https://doi.org/10.31224/osf.io/hdr2t

  • Buoyancy effects
  • Chemical reaction
  • MHD
  • Porous medium
  • Stretching sheet
  • Suction/injection

  Downloads: 669 - Submitted 2020-05-26 - Posted 2020-05-26

  • PDF

• INVESTIGATION OF TILT-ANGLED DELIVERY VALVE IN HYDRAULIC RAM – EXPERIMENT RESULTS

  M. Suarda, I. G. B. W. Kusuma, M. Sucipta, A. Ghurri

  DOI: https://doi.org/10.31224/osf.io/mjf75

  • Delivery valve
  • hydraulic ram
  • tilted-angle
  • visualization
  • working cycle.

  Downloads: 746 - Submitted 2020-05-26 - Posted 2020-05-26

  • PDF

• EXPERIMENTAL AND NUMERICAL INVESTIGATION ON THE TENSILE AND WATER ABSORPTION BEHAVIOR OF JUTE/CARBON REINFORCED EPOXY COMPOSITE

  Abu Shaid Sujon, Nagib Mehfuz, Mohammad Ahsan Habib

  DOI: https://doi.org/10.31224/osf.io/n68j9

  • Carbon fiber
  • Finite element analysis.
  • Hybrid laminates
  • Jute fiber
  • Mechanical properties
  • Stacking sequences

  Downloads: 852 - Submitted 2020-05-26 - Posted 2020-05-26

  • PDF

• DESIGN, FABRICATION, AND TESTING OF A MOVABLE SOLAR OPERATED SPRAYER FOR FARMING OPERATION

  W.A Issa, B Abdulmumuni, R.O Azeez, Okpara I.N, J.O Fanifosi, Ologunye O.B

  DOI: https://doi.org/10.31224/osf.io/d68vm

  • Backup time of spray
  • Discharge &amp
  • Application rate
  • Power conversion efficiency

  Downloads: 4138 - Submitted 2020-05-26 - Posted 2020-05-26

  • PDF

• MEASUREMENT OF FLOW RESISTIVITY USING COMPUTATIONAL FLUID DYNAMICS

  Aamir Khan, S. Jeyanthi, Hemantika Aggarwal, Karanbir Singh, Robin Kumar, Shivam Bhatia

  DOI: https://doi.org/10.31224/osf.io/zuadt

  • CFD tool.
  • fibrous material
  • flow resistivity

  Downloads: 650 - Submitted 2020-05-26 - Posted 2020-05-26

  • PDF

• THREE DIMENSIONAL ANALYSIS OF BOLTED JOINT MEMBER STIFFNESS USING FRUSTA METHOD

  Muhammad.M. Gogazeh, Hassan.A. AL Dabass

  DOI: https://doi.org/10.31224/osf.io/vm3wh

  • Bolted Joint Member Stiffness.

  Downloads: 623 - Submitted 2020-05-26 - Posted 2020-05-26

  • PDF

• DIESEL ENGINE PERFORMANCE, EMISSION AND COMBUSTION CHARACTERISTICS WITH OPTIMIZED BLEND OF B25 METHYL ESTER OF MANGO SEED OIL

  K. Vijayaraj, A. Muruga Ganesan, C.G. Saravanan

  DOI: https://doi.org/10.31224/osf.io/ya4c9

  • Biodiesel
  • combustion.
  • emission
  • methyl ester of mango seed oil
  • performance

  Downloads: 644 - Submitted 2020-05-26 - Posted 2020-05-26

  • PDF

• Assessment of Groundwater Pumping Alternatives for Irrigation Purposes based on the SIMUS Method

  M. Socorro Garcia-Cascales, Angel Molina-Garcia, J.M. Sanchez-Lozano, A. Rubio-Aliaga, Nolberto Munier

  DOI: https://doi.org/10.31224/osf.io/esrv2

  • Multi-Criteria Decision Making (MCDM)
  • SIMUS
  • Solar groundwater pumping

  Downloads: 729 - Submitted 2020-05-26 - Posted 2020-05-26

  • PDF

• Shallow Geothermal Potential Impact on the Energy Transition. A Case Study Region of Murcia, Spain

  Adela Ramos-Escudero, Isabel C. Gil-Garcia, M. Socorro Garcia-Cascales, Angel Molina-Garcia

  DOI: https://doi.org/10.31224/osf.io/7h8ae

  • Energy transition
  • GIS
  • Renewable heating and cooling
  • Shallow geothermal energy

  Downloads: 640 - Submitted 2020-05-26 - Posted 2020-05-26

  • PDF

• Influence of Shear Cutting Process Parameters on the Residual Stress State and the Fatigue Strength of Gears

  Daniel Müller, Jens Stahl, Isabella Pätzold, Roland Golle, Thomas Tobie, Wolfram Volk, Karsten Stahl

  DOI: https://doi.org/10.31224/osf.io/t4wbq

  • Fatigue
  • Fineblanking
  • Gears
  • Near-Net-Shape Blanking
  • Residual Stresses
  • Shear Cutting

  Downloads: 934 - Submitted 2020-05-19 - Posted 2020-05-25

  • PDF

• Evaluation of seismic performance factors for tension-only braced frames

  Shariati

  DOI: https://doi.org/10.31224/osf.io/wxf5k

  • tension-only bracing
  • response modification factor
  • incremental dynamic analysis
  • seismic design
  • overstrength factor

  Downloads: 2102 - Submitted 2020-05-25 - Posted 2020-05-25

  • PDF

• Introducing Design Space-Independence in Beam Cross-Section Optimization

  Chander Sen, Jitendra Prasad

  DOI: https://doi.org/10.31224/osf.io/ntjf2

  • Beam cross-section optimization
  • Design space
  • shaft optimization
  • structural optimization
  • topology optimization

  Downloads: 747 - Submitted 2020-05-22 - Posted 2020-05-24 - Versions: 2

  • PDF
  • Supplementary Material

• Thinking systematically about the online academic experience

  Mikhail Kats

  DOI: https://doi.org/10.31224/osf.io/mdgyw

  Downloads: 788 - Submitted 2020-05-23 - Posted 2020-05-24

  • PDF

• Seismic Response Control of Offshore Platforms Equipped with Optimum Localization of SMA

  Mohammad Aghajani Delavar, Khosrow Bargi

  DOI: https://doi.org/10.31224/osf.io/8y9d5

  • jacket
  • offshore
  • platform
  • seismic assessment
  • SMA
  • SMA connection

  Downloads: 1082 - Submitted 2020-05-22 - Posted 2020-05-22

  • PDF

• EFFECT OF HIGH VOLUME FLY ASH CONCRETE IN SELF-CURING ENGINEERED CEMENTITIOUS COMPOSITE (ECC)

  Yoganantham C, Joanna P.S

  DOI: https://doi.org/10.31224/osf.io/b53wx

  • Calcium Carbonate
  • Eco- Friendly
  • Engineered Cementitious Composite
  • High Volume Fly Ash
  • M sand
  • PVA fibre
  • Self-curing agent

  Downloads: 641 - Submitted 2020-05-20 - Posted 2020-05-20

  • PDF

• THE IMPACT OF SHARE CROPPING SYSTEM ON THE PRODUCTIVITY OF RICE FARMING IN CENTRAL JAVA

  Lestari Rahayu Waluyati, Jamhari, Abi Pratiwa Siregar

  DOI: https://doi.org/10.31224/osf.io/n5fjy

  • Indonesia
  • Klaten Regency
  • productivity
  • rice farming
  • share cropping system.

  Downloads: 584 - Submitted 2020-05-20 - Posted 2020-05-20

  • PDF

• COMPARISON OF MECHANICAL AND MICROSTRUCTURAL EXAMINATION OF AL7075 COMPOSITES REINFORCED WITH MICRO AND NANO B4C

  Krishna Mohan Singh, A. K. Chauhan

  DOI: https://doi.org/10.31224/osf.io/reygs

  • Al7075 alloy
  • and UTS
  • B4Cp
  • Stir casting

  Downloads: 755 - Submitted 2020-05-20 - Posted 2020-05-20

  • PDF

• SIMULATION STUDIES ON MICROWAVE ASSISTED DRYING OF BIOMASS WITH SPECIAL ATTENTION TO THE SIZE OF BIOMASS

  Varinder Singh, Nitin Saluja, Amrinder Singh

  DOI: https://doi.org/10.31224/osf.io/qf7xd

  • Biomass
  • Heat transfer
  • Microwave drying
  • Simulation.

  Downloads: 591 - Submitted 2020-05-20 - Posted 2020-05-20

  • PDF